Sales Service +1 (510) 217-0460

ContactCatalog
Go
Japaneese Chinese
Home Products/Ionizing Bars/Ultra-clean Environment/AeroBar 5225S Standalone Ionizer

AeroBar® 5225S

AeroBar 5225S Standalone Class 1 Environment Ionizing Air Bar

        

    

Standalone Efficient Ionization for Optimal Performance

Simco-Ion’s Standalone Digital AeroBar Model 5225S ionizing bar is specifically designed to provide high performance with simple integration and operation. Adjustable and precise, easy-to-use digital settings allow the AeroBar to be used in a multitude of applications, ranging from inside tools to workstations and cleanroom areas. A choice of ionization modes, output voltage, and timing provide versatility to meet static charge neutralization requirements.

  • All parameters are held within the AeroBar; no controller required
  • Fully adjustable parameters for each AeroBar utilizing Pulsed DC or Steady-state DC modes
  • Several AeroBar lengths including three lengths specifically designed for EFEMs>
  • Ion current monitoring
  • FMS alarm output
  • Single-crystal silicon emitter points

 

 

 

 

 

For additional information on the AeroBar 5225S ionizer or other ionization solutions for static control and particle contamination control, contact Sales Services.

Specifications

Voltage Input: 24 VAC, 50/60 Hz, 1W (typ)
Output: 0-20 kVDC, ±10% for each polarity on an individual AeroBar; positive or negative output levels can be adjusted separately with IR Handheld Remote Model 5570
Ion Emission Pulse DC, Steady-state DC, or Standby
Emitter Single-crystal Silicon or Titanium, replaceable
Cleanroom Class ISO 14644-1 Class 1 (Single-crystal Silicon emitter)
ISO 14644-1 Class 3 (Titanium emitter)
Dimension 2.1”H x 1.2”W x 22.4 / 28.4 / 35.7 / 44.4 / 55.6 / 64.4 / 75.5 / 84.4”L
(5.3 x 3.1 x 56.9 / 72.1 / 90.7 / 112.8 / 141.2, 163.6 / 191.8 / 214.4 cm)
Weight 1.13 lb (0.51 kg) for a 22” (55.88 cm) bar (approx. 6 oz per additional ft/0.17 kg per additional 30.5 cm)
  • Wire Terminal Connector
  • Wire Ties
  • Tie Blocks
  • Interconnect Cable s
  • CPC Cables
  • Standard AeroBar Installation Kit
  • Pine Tree Clips
  • Eyebolt with nut
  • Mid-Clips
  • Wire Clip
  • Flat Clip
  • Stainless steel T-Bar Clip
  • Ultra-clean Sleeved (Silicon) Emitter Point
  • Class One (Titanium) Emitter Point
  • Simco-Ion Emitter Point Cleaner
  • Polycarbonate Rods

Please refer to all the applicable industry standards for comprehensive electrostatic charge management on our Industry Standards page.

BROCHURES

Target Markets

  • Back-End Semiconductor Processing
  • Front-End Semiconductor Manufacturing

Target Applications

The AeroBar 5225S is designed to control electrostatic discharge and particle contamination in mini-environments and workstations and in locations where forced-air is not favored and usually work in cleaner environment with laminar flow.