Sales Service +1 (510) 217-0460

ContactCatalog
Go
Japaneese Chinese
Home Products/Special Application Ionizers/Confined Space/ionONE Spot Ionizers

ionONE

IonONE Spot Ionizers

     

  

Control Static Electricity & Charge Neutralization in Tight Spaces

Simco-Ion, Technology Group's Model Micro S Spot Ionizer is suited for applications where airflow from HEPA filters or fans is present, or when the area to be protected is in close proximity. Simco-Ion, Technology Group's Micro SA Spot Ionizer uses compressed dry air (CDA) to provide the airflow necessary to ionize a nearby confined area when there is no existing airflow.

  • Compact design
  • Self-balancing technology
  • Easy maintenance
  • Power Indicator status LED
  • Air assist version for precise ionized air delivery

 

Specifications

Input Voltage Isolated 12 VDC, 30 mA
Discharge Micro S: <10 sec @ 3” (7.62 cm)
Micro SA: <8 sec @ 6” (15.2 cm), 20 lpm airflow (min)
Balance Micro S: <±30V; Micro SA: <±20V
Coverage Micro S: 6” x 6” (15.2 x 15.2 cm) @ 3” (7.62 cm)
Micro SA: 6” x 6” (15.2 x 15.2 cm) @ 6” (15.2 cm)
Cleanroom Class ISO 14644-1 Class 5
Dimension 2.5”L x 1.6”W x 0.65”H (6.35 x 4.06 x 1.65 cm) with flange; air fitting connection on Micro SA adds 0.40” (1.02 cm) to length of chassis
Weight Micro S: 0.035 lb (0.016 kg)
Micro SA: 0.042 lb (0.019 kg)
 
 

Please refer to all the applicable industry standards for comprehensive electrostatic charge management on our Industry Standards page.

BROCHURES

Target Markets

  • Back-End Semiconductor Processing
  • Electronics Assembly
  • Life Sciences

Target Applications

The ionONE Micro S and Micro SA are perfect for use in applications where space is at an absolute premium, and ionization requirements are mild to moderate. We anticipate using the Micro S and SA for:

  • Ionizing the area around pick-and-place heads on board stuffing equipment to eliminate ESD damage to chips
  • Ionizing the area under an inspection microscope to keep particles from being attracted to products during assembly or inspection processes
  • Ionizing the area around test sockets on IC test equipment, as well as on the chip handling feeder mechanisms